Using Thermal Label Printers (Shiplark)

If you are using thermal printers you will need to make sure that Shiplark is connected correctly so the shipping label can be printed.  Shiplark can utilize: 

  • Zebra or LP2844
  • ZP 500

 

Installing the Printer

Step 1: The most updated printer drivers for your thermal printer are installed

Very Important: When installing the drivers, it is important to select if your printer is connected using a printer or a USB port. 

Step 2: Your computer is detecting the thermal printer

Step 3: Drivers for thermal printer don't always match the version of printer you have.  It is important to check the type of drivers your specific printer uses.  

  • Zebra 2844 has an EPL driver

  • Zebra 500 as a ZPL driver

Note: it is very important to know the driver type as this will be needed in the printer configuration of the shipping processor. 

 

Connect Shiplark to the thermal printer

In the shipping screen of the store configuration, after a shipping processor is selected, the printer that prints out the labels for domestic and/or international can be selected.

Important: the Label Image Type corresponds to the printer driver type. 

 

 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Based on our last 100 reviews, online sellers Webgility

Powered by Zendesk